home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ASME's Mechanical Engine…ing Toolkit 1997 December
/
ASME's Mechanical Engineering Toolkit 1997 December.iso
/
fluid
/
phoe0.txt
< prev
next >
Wrap
Text File
|
1995-09-05
|
4KB
|
127 lines
PHOENICS V 1.4 Sharware
-------------------------------------------------------------------------
Disclaimer
This software was not developed by or at Cranfield University and we take
no responsibility for its use. If you have any questions concerning the use
of this software or concerning problems related to this software please
direct your enquires towards the developers CHAM
-------------------------------------------------------------------------
There are 3 zip files listed below. Each file represents a disk. You will need to unzip
them and copy the files to three 3.5" High Density disks. The first disk contains a program
called <code>install</code>. Run this to install PHOENICS V 1.4 onto your hard disk.
If you are at Cranfield:
You will need to run the World Wide Web on a
Pegasus machine. Click the mouse on each of the three files one at a time and
you will be prompted as to the directory and file name you wish to save each file
as. For simplicity use the same names as those below.
Once you have saved the
three files you will need to ftp them over to your vulcan account. If you do
not have a large enough quota you may need to do this one file at a time. When
ftp'ing remember to set the file transfer format to binary by simply typing
binary at the ftp prompt prior to sending the file.
Now you need
to log onto a PC and create three temporary directories disk1 disk2 disk3.
Copy the three files from your z: drive to the three directories ie copying
phoe1.zip to disk1, phoe2.zip to
disk2, etc. Then go into each directory respectively and unzip each zip
file using:
pkunzip filename
Next erase the zip files and copy
the remaining files in each directory to three 3.5" High Density disks (each directory consists of a
disk full of files). The disk which represents disk1 is the 1st
disk and contains the installation program install. disk2
is the 2nd disk and disk3 is the third disk. These three disks
represent the installation disks of the PHOENICS V 1.4 program.
This is a list of the three files:
phoe1.zip (1.3 Mb)
phoe2.zip (1.3 Mb)
phoe3.zip (1.4 Mb)
If you have any problems installing this program first check our
FAQs page and then please direct your enquires to the
software manufacturer CHAM.
-------------------------------------------------------------------------
FAQs about Installing PHOENICS V 1.4 Sharware
---------------------------
During the process the install program gives an error
message that says "please insert disk 4".
This happens when you are trying to run the installation from the
c drive. You need to copy the files of the three directories on the c
drive to three 3.5" disks and run the installation from these disks.
---------------------------
I am unable to unzip it. Which version of pkunzip is required?<p>
We use Version 1.1 at Cranfield.
---------------------------
Do only Cranfield folks have authorization to do this, or is the server
just busy everytime I try?
Anybody who wishes to download a copy of this program is welcome to. There
is no security preventing people from outside the campus from downloading the
software. You will probably experience less of a delay if you download when it
is night in Europe.
-------------------------------------------------------------------------
Address of CHAM
Europe (Head Office)
Concentration, Heat & Momentum Ltd
Bakery House
40 High Street
Wimbledon Village
London SW19 5AU
United Kingdom
Tel: +44 181 9477651
Fax: +44 181 8793497
E-Mail: phoenics@cham.demon.co.uk
Technical Support E-Mail: usersupp@cham.demon.co.uk
North America
PHOENICS North America Inc.
Hartsfield Colonnade
4903 Riverdale Road
Suite 600
Atlanta, GA 30337
United States
Tel: +1 404 996-8656
Fax: +1 404 996-5123
Asia
CHAM-Japan
406 Kojimachi Intelegent Bldg 4F, 3-5-4 Kojimachi
Chiyoda-ku, Tokyo 102
Japan
Tel: +81 352 10 93 56
Fax: +81 352 10 93 90